From Carpet to Hardwood: Converting an Existing Staircase
Going from carpet to hardwood stairs tends to start the same way: someone lifts a corner of the carpet to see what is underneath.
Can you put hardwood on existing carpeted stairs?
In many cases, yes, but not by simply removing the carpet. Stairs built to be carpeted can be made from construction-grade material that was never meant to be seen. Conversion means cladding or replacing the treads and risers with hardwood, rebuilding the nosings, and often replacing the balustrade at the same time.
Carpeted stairs hide a lot. Sometimes what is underneath is a genuine hardwood staircase that was covered up in the nineties, and the job is a refinish. Other times it is construction-grade lumber that was never meant to see daylight.
Both are workable. They are very different projects.

What a carpet to hardwood stairs conversion involves
Find out what is under there
Lifting a section of carpet at the nosing shows the truth fastest. Solid hardwood with a finished nosing means a refinish. Plywood or spruce means cladding or replacement.
Template the existing stair
An existing staircase may not be perfectly square. Each tread gets measured individually, because a 3 mm discrepancy that nobody notices under carpet becomes a visible gap under hardwood.
Machine the components
Treads, risers and nosings are made in the shop to the measurements of the existing stair. Ironwood does not stain or paint; finishing is done by your finisher, who matches the colour of the new hardwood stairs to the floor.
Deal with the balustrade
The existing rail often has to come off to fit treads properly. This is the moment to decide whether it goes back on or gets replaced; the access will not be this good again.
Install on site
Components arrive ready to fit, and site work is assembly and final detailing rather than fabrication. Ironwood covers the treads and landings while other trades work.

The things people are surprised by
Two of them, consistently. The first is sound: hardwood stairs are louder than carpeted ones, and in an open-plan house that carries. Runners solve it if it bothers you, and plenty of people decide they like the sound of a solid stair.
The second is the riser height at the bottom. Adding tread thickness over an existing stair changes the rise of the first step unless it is accounted for, and an inconsistent bottom riser is a trip hazard. It is a solved problem, but it has to be solved deliberately.
What shapes the quote
The variables that move a quote are the number of treads, whether the stair is open on one side or two, whether there are winders to template individually, and whether the balustrade is being replaced. A straight, closed flight is the simplest staircase in any house.

Matching the floor you already have
The hardest part of the whole job is not structural, it is colour. Stair treads are a different thickness and often a different cut of timber from flooring, so the same stain lands differently on them. Species, grain direction and sheen all shift the result.
Samples made on the actual tread material and checked in your house, in your light, with your finisher, are worth having before anything is finished in bulk. A tread that matches perfectly in the shop and not at all in your hallway is a very expensive way to learn that lesson.
Questions about hardwood stairs
What is under the carpet on a carpeted staircase?
It can be construction-grade plywood or spruce treads with no finished nosing, plus staple holes and adhesive. It is structurally fine and cosmetically unusable, because it was never intended to be seen. Sometimes there is a genuine hardwood stair underneath that only needs refinishing, which is why lifting a corner at the nosing comes first.
Should the railing be replaced at the same time as the treads?
It is worth pricing together. The balustrade often has to come off to fit new hardwood stairs properly, so if the rail is dated, replacing both at once saves taking the stair apart twice. Ironwood has both a wood shop and a metal shop, so treads and railing can be quoted together.
How do I get a quote for converting carpeted stairs to hardwood?
Send photos of the stair to Ironwood Stair & Rail, from the bottom and from the side, with a corner of carpet lifted at a nosing if possible. Note whether the railing stays or goes. Ironwood works in Calgary and area; call (403) 552-1007 for a quote.
Carpet to Hardwood Stair Conversions, Calgary
Replacing carpet with hardwood treads changes how a staircase sounds, cleans and wears, not just how it looks. Ironwood makes treads, risers and railings in its Calgary wood and metal shops and installs them on site, and the finishing of new hardwood stairs is done by your finisher.
Thinking about pulling the carpet off your stairs?
Send photos of the stair, with a corner of the carpet lifted at a nosing if you can, for a quote.