Paint-Grade or Stain-Grade? The Material Under the Finish
Paint-grade and stain-grade come up during a stair quote, and people reasonably assume the terms describe what is going on top. They actually describe what is underneath, and they are settled long before the finish is.
What is the difference between paint-grade and stain-grade?
Stain-grade means the wood has been selected on the assumption that you will see it: clear hardwood, grain matched across adjacent pieces, no filler anywhere, joints cut tight because nothing can be hidden. Paint-grade means the wood has been selected on the assumption that you will not: a stable, close grained wood or an engineered board, with joints that can be filled because paint covers everything. Two staircases can be identical in shape and carry very different material.

That staircase pairs both looks: wood treads you look straight down at, white painted risers below them, and black metal pickets under a wood handrail. On a stair like this, stain-grade treads and paint-grade risers can share one flight, because no one will ever see the material under the white.
What stain-grade and paint-grade each buy
Stain-grade
- Clear hardwood selected for figure and colour.
- Adjacent boards chosen so the grain runs on convincingly.
- No filler. Every joint has to be genuinely tight because it will be visible.
- Pricier material, and more of it set aside at the bench.
- Repairs are difficult, because a patch has to match grain as well as colour.
Paint-grade
- Stable, close grained wood or engineered board.
- Grain is irrelevant, so boards are chosen for straightness and stability.
- Joints are filled and sanded. Paint closes what filler does not.
- Cheaper material, though not always cheaper labour.
- Repairs are straightforward: fill, sand, recoat, done.
The assumption worth challenging
Paint-grade is cheaper on material and it is not automatically cheaper overall. A painted staircase needs the surfaces genuinely flat, because gloss paint is merciless about anything that is not: every ripple, every proud fastener, every slightly over sanded edge shows up under a sheen. Getting that right takes preparation time, and preparation time is labour.
A clear-finished hardwood stair spends its money at the other end. The material costs more and more of it gets rejected, but the finishing is comparatively fast because you are showing the timber rather than hiding the substrate.
Paint-grade saves money on the boards. Whether it saves money on the staircase depends entirely on how flat the paint has to look.

In a painted assembly like this one, with square white newels, white balusters and a wood handrail over wood treads, filled joints disappear under the paint. That is the specific advantage paint-grade material is bought for, and it is a real one.
The mistake that is expensive to undo
Wasteful but harmless. You have paid for figured hardwood and covered it up. The stair will be excellent; the money went somewhere you cannot see.
The one that does not work. A paint-grade wood can take stain unevenly, the filled joints show as dark or light patches, and no amount of skill fully rescues it. This is the change of mind to avoid.
The grade has to be set before the wood is bought. A decision after that point means new material.
Stain-grade treads and handrail with paint-grade risers, stringers and balusters is a sensible mix, and for good reason.

A handrail, like this light wood rail over black metal balusters, is the element where stain-grade selection matters most, because it is at eye level, it is continuous, and your hand is on it. Grain that jumps at a joint is visible from the bottom of the flight.
Which wood it should be is the next question, and it is a genuinely different one: hardness, colour and how a wood accepts stain all pull in different directions. The options are covered in choosing wood for stairs. Ironwood does not stain or paint, so the finish itself is applied by your finisher, and the province publishes its building codes and standards online as a reference while a stair is planned.
Settle these before the timber is ordered
- Which components are being painted and which are being finished clear.
- Whether the treads have to match an existing floor.
- Whether the risers will be painted, even on a hardwood stair.
- How flat the painted surfaces need to look, which sets the gloss level.
- Whether anyone is likely to want the stair stained later. If that is even possible, do not buy paint-grade.
Questions about stain-grade and paint-grade stairs
Can a paint-grade stair be stained later?
It is the change of mind to avoid. Paint-grade wood is chosen for stability rather than grain, and its joints are filled, so under stain the filler and the uneven grain show as patches. If anyone is likely to want the stair stained later, choose stain-grade for those parts from the start.
Can one staircase mix stain-grade and paint-grade parts?
Yes, and it is a sensible mix. Stain-grade treads and handrail sit where you look and touch, while paint-grade risers, stringers and balusters disappear under white. The first photo above shows the look: wood treads over white painted risers. The key is deciding which parts are which before the wood is bought.
Who applies the finish, and how do I get a quote?
Ironwood does not stain or paint; the finish is applied by your own finisher. Send Ironwood photos or plans of the stair with a note on which parts will be painted and which will be clear. Ironwood works in Calgary and area; call (403) 552-1007 or use the contact page.
Getting the grade right before the wood is bought
Send Ironwood photos or plans, with a note on which parts of the staircase will be painted and which will be clear, for a quote.